Siemens SICAM AK 3, User Manual

Page: 182 / 260

Engineering via SICAM TOOLBOX II
182
SICAM RTUs, SICAM AK 3 User Manual
Edition 07.2016, DC2-028-2.03
4.1 Telecontrol
The acquisition parameter setting and documentation of the process-technical process and its
associated data points is enabled in the SICAM TOOLBOX II mainly with the help of the tool
"OPM II" (Object Orientated Process Data Manager).
Overview of the Tasks
Task Meaning
Presets Define user and rights; language
Initialization of the plant data Configure plant and automation unit
Import firmware Load firmware into the SICAM TOOLBOX II
HW configuration Select installed system elements
Parameterization of the sys-
tem technique
•
Time management
•
Communication common
•
Protocol Elements
•
Redundancy
•
Representation of data points assigned to hardware I/Os
•
Decentral archive
Parameterization of the pro-
cess technique
•
Create images
•
Assign process images to data points
•
Settings for configured process signals
•
Routing of send data and receive data
Bulk edit Edit great amounts of image parameters
Transfer parameters Translate parameters for the target system
SD Card Write and read application data
Import/Export Generate and read backups of the application data
Documentation Formatted spreadsheets for printing
•
Hardware (configuration, pin assignment)
•
Parameter
Load Parameters Transfer parameters and function diagram to the target sys-
tem
Parameter comparison Compare settings between current project and target system
Data flow test Record and store dataflow in the target system
Message simulation Send messages from the SICAM TOOLBOX II to a target
system
Service function online Read and set time of target system
ST emulation Execute system-internal functions (only for authorized users)
Topology test Acquisition of physically connected automation units in a
SICAM RTUs automation network
Diagnosis Read detailed information generated by the self monitoring