Siemens SENTRON PROFINET Proxy SPP2000, Manual

Page: 55 / 90

Data traffic
6.3 Acyclic data traffic
PROFINET Proxy SPP2000
Equipment Manual, 03/2022, L1V30814715D-01
53
Byte Length
(bits)
Format Description PAC2200 PAC2200
MID
PAC2200
CLP
PAC3200T
116 32 Unsigned long Default menu number R/W R R
120 32 Unsigned long Timeout for return to
default menu
R/W R R
124 32 Unsigned long Date format index R/W R/W R/W R/W
128 32 Unsigned long Daylight saving time
index
R/W R/W R/W R/W
132 32 Unsigned long Offset for time zone R/W R/W R/W R/W
136 32 Unsigned long Output - pulse divider R/W R/W R/W R/W
140 32 Unsigned long Input - pulse divider R/W R/W R/W R/W
144 32 Unsigned long Invert display R/W R/W R/W
148 32 Unsigned long Change current L1
direction yes/no
R/W R R R/W
152 32 Unsigned long Change current L2
direction yes/no
R/W R R R/W
156 32 Unsigned long Change current L3
direction yes/no
R/W R R R/W
160 32 Unsigned long I(N) on display R/W R/W R/W
max. 164
This data set is always readable and writable over the entire length (164 bytes).
•
Ignore the fields not supported by the selected device.
6.3.9 DS132 limit parameters
Via data set DS132, the parameterization of the limits of the individual PAC3200T can be read
and modified.
This data set only applies to the PAC3200T device. The corresponding slot/subslot address
must therefore be used for reading.
Table 6- 13 Structure of data set DS132 - read access and write access
Byte Length (bits) Format Description
0 32 Unsigned long Setting parameter limit 0 On/Off
4 32 Float Setting parameter limit 0 hysteresis
8 32 Unsigned long Setting parameter limit 0 delay
12 32 Unsigned long Setting parameter limit 0 operand index
(no/AND/OR)
16 32 Unsigned long Setting parameter limit 0 index of data list
20 32 Float Setting parameter limit 0 value
24 32 Unsigned long Setting parameter limit 0 mode >=/<
28 32 Unsigned long Setting parameter limit 1 On/Off
32 32 Float Setting parameter limit 1 hysteresis
36 32 Unsigned long Setting parameter limit 1 delay
40 32 Unsigned long Setting parameter limit 1 operand index
(no/AND/OR)
44 32 Unsigned long Setting parameter limit 1 index of data list