Assembling
4.6 Plugging and pulling MM900 media modules
SCALANCE XR-500
38
Operating Instructions, 05/2014, A5E03275845-05
Plugging in media module
Figure 4-3
Plugging a media module into a SCALANCE XR552-12M. SCALANCE XR528-6M is
used analogously.
To use MM900 media modules in a modular SCALANCE XR-500, follow the steps below:
1.
Remove the dummy cover of the device slot into which you want to insert a media module
①
.
2.
Pull the handle out of the media module
②
.
The media module cannot be installed unless the handle is pulled out.
3.
Place the media module in the guide rails of the device slot
③
.
The media module is correctly installed when it locks easily into the device and the front
panel of the module is flush with the front of the device.
4.
Push the handle back into the module
④
.
The media module is then locked in place.
