manualshive.com logo in svg

Siemens SCALANCE W788-1PRO, Operating Instructions Manual

The Siemens SCALANCE W788-1PRO is a cutting-edge networking device that enhances connectivity and communication in industrial environments. Ensure a seamless setup and optimal performance by referring to the comprehensive Operating Instructions Manual. Download this manual for free at manualshive.com, providing step-by-step guidance and troubleshooting assistance.

Share
Download
background image

Configuration Using Web Based Management and the Command Line Interface 

C79000-G8976-C184-07 

219

 

n 

down

 monitors the connection to a specific IP address 

cyclically. This is achieved using ICMP packets (Echo Request/Reply or Ping). If 

 other words, no ping reply from the other end, a 

deauthentication frame is sent to all WLAN clients. The relevant WLAN interface is 

tinues to be monitored and the WLAN interface is enabled 

again as soon as the access point has received a ping reply from the pinged 

he mechanism makes it possible, for example, to monitor a connection between 

wireless clients and a server. If the server can no longer be reached over the 
access point, the clients are deauthenticated and the WLAN interface of the access 

oint is disabled. The clients roam and then connect to a different access point 

from which the server can be reached. As soon as the first access point can reach 
the server again, it re-enables its WLAN interfaces. 

Syntax of the Command Line Interface 

6.7.3  Forced Roaming on IP Dow

Functional Description 

Forced Roaming on IP 

the IP connection aborts; in

then disabled. 

The IP connection con

station. 

T

p

CLI\IFEATURES\FORCED_ROAM\WLAN1> 

or for the second wireless adapter (if it exists) 

CLI\IFEATURES\FORCED_ROAM\WLAN2> 

Command Description 

Comment 

froam [E|D] 

Enables of disables forced roaming 
on IP down. 

 

ip [IP address] 

Monitors the connection to this IP 
partner. 

 

interval [100 - 5000] 

Specifies the monitoring cycles to 
the IP partner in milliseconds. 

 

lostpkts [1 - 5] 

Specifies the maximum number of 
unanswered pings before the WLAN 
interface is disabled. 

 

 

 

Note 

Forced roaming on IP Down cannot be used in conjunction with iPCF or WDS on 
the same WLAN interface. 

Operating Instructions SCALANCE W78x 

Summary of Contents for SCALANCE W788-1PRO



















































































































































































































































































Reviews:

No comments

Related manuals for SCALANCE W788-1PRO

8e6 Technologies Enterprise Filter Authentication R3000 Quick Start Manual preview
Enterprise Filter Authentication R3000
Brand: 8e6 Technologies Pages: 66
Barco EX Safety Manual preview
EX
Brand: Barco Pages: 100
Patton electronics 2888 Getting Started Manual preview
2888
Brand: Patton electronics Pages: 51
Z3 Technology Z3-DM8168-PCI-RPS Manual preview
Z3-DM8168-PCI-RPS
Brand: Z3 Technology Pages: 20
Z3 Technology Z3-DM8107-SDI2-RPS User Manual preview
Z3-DM8107-SDI2-RPS
Brand: Z3 Technology Pages: 75
Z-Wave USB Dongle User Manual preview
USB Dongle
Brand: Z-Wave Pages: 13
DAQ system PCIe-FRM13 User Manual preview
PCIe-FRM13
Brand: DAQ system Pages: 41
DAQ system PCIe-SER01 User Manual preview
PCIe-SER01
Brand: DAQ system Pages: 19
Stanwax Laser S4i Manual preview
S4i
Brand: Stanwax Laser Pages: 9
Google AC-1304 User Manual preview
AC-1304
Brand: Google Pages: 14
APM AQ-500h Specification Sheet preview
AQ-500h
Brand: APM Pages: 3
Patton electronics 3040/V35 Installation And Operation Manual preview
3040/V35
Brand: Patton electronics Pages: 23
Matrix Switch Corporation MSC-5-3232 Product Manual preview
MSC-5-3232
Brand: Matrix Switch Corporation Pages: 61
Qixiang Technology QR310 Installation And Configuration Quick Manual preview
QR310
Brand: Qixiang Technology Pages: 16
Garland EdgeLens INT10G8LR56 User Manual preview
EdgeLens INT10G8LR56
Brand: Garland Pages: 30
EnGenius ETR9360 Quick Start Manual preview
ETR9360
Brand: EnGenius Pages: 3
Renesas Emulator MCU Board for 38D5 Group M38D59T-RLFS User Manual preview
Emulator MCU Board for 38D5 Group M38D59T-RLFS
Brand: Renesas Pages: 4
red lion Yaskawa 2000 Information Sheet preview
Yaskawa 2000
Brand: red lion Pages: 5

Brands by name

Popular brands

Load more brands