Configuration Using Web Based Management and the Command Line Interface
C79000-G8976-C184-07
122
d
Configurati
Select the check boxes
the SNMP functionality you want
to use. SNMP version 3
ssions to be assigned and protocol level,
n, and enc
nd us
Users submenus. You
entries there if the
Pv3 enabled chec
e
Notice
When using SNMP ver
uld disable SNMP V1 and V2c because the
curity settings of SNMP V3 can be bypassed by access over SNMP V1 or V2c.
6.2.7 SNMP Config Menu Comman
on
of the entries according to
allows permi
authenticatio
ryption. You specify groups a
can also make
ers in the Groups and
SNM
k box is not selected, however the ntries are not applied.
sion 3, you sho
se
Trap
Submenu
Here, you enter the IP addresses of up to 10 trap receivers. The SCALANCE W78x
sends a trap to all the addresses you enter if their Enable trap check boxes are
selected.
Note
During a warm or cold restart with a wireless connection ( AP client, WDS, or
WRED), there is no guarantee that the recipient can be reached at the time when
the trap is sent. This leads to a loss of the message.
Groups
Submenu
This page displays the SNMPv3 groups. You can create a new group by clicking
the
New
button and specifying the group name, the security level, and the write or
read permissions.
You can delete a group by selecting the check box in the
Del
column and clicking
the
Set Values
button. If members are already entered in the group, you cannot
delete the group nor is it possible to change the security level of the group.
Operating Instructions SCALANCE W78x
