manualshive.com logo in svg

Siemens SCALANCE W788-1PRO, Operating Instructions Manual

The Siemens SCALANCE W788-1PRO is a cutting-edge networking device that enhances connectivity and communication in industrial environments. Ensure a seamless setup and optimal performance by referring to the comprehensive Operating Instructions Manual. Download this manual for free at manualshive.com, providing step-by-step guidance and troubleshooting assistance.

Share
Download
background image

Configuration Using the Wizards of Web Based Management 

Operating Instructions SCALANCE W78x 

69

 

dress Settings (Client Mode only) 

Assigning

ernet port of 

the SCALANCE W78x client before it can be reached. This MAC address is used 

 client for wireless communication with the access point. 

nt, 

–

  Automatically, the client adopts the source MAC address of the first frame 

that it receives over the Ethernet interface. 

–

  Manual entry by the user. 

s. 

AC addresses need to be served downstream from the client, 

the following setting is available for SCALANCE W746-1PRO and SCALANCE 
W747-1RR: 

–

  Layer 2 Tunneling  

This setting meets the requirements of industrial applications in which MAC 
address-based communication with several devices downstream from the client 
is required. Clients with this setting cannot connect to standard Wi-Fi devices 
and SCALANCE W access points with firmware V3.0 or older. 

 
 

Note 

The layer 2 tunneling setting is available only with the following model variants: 

•

  SCALANCE W78x in client mode 

•

 SCALANCE 

W746-1PRO 

•

 SCALANCE 

W747-1RR 

C79000-G8976-C184-07 

5.4.6  Adopt MAC Ad

 the MAC Address 

A MAC address must be specified for the device connected to the Eth

by the

●

  If there is precisely one MAC address to be served downstream from the clie

there are two ways of doing this: 

These settings have no effect on communication with standard Wi-Fi device

●

  If up to eight M

 

The SCALANCE W746-1PRO and SCALANCE W747-1RR devices can also 
provide access to a wireless network for several Ethernet devices (IP mapping). 
For an access point with MAC filtering, only one MAC address is visible to the 
SCALANCE W78x client, there can be no filtering according to the MAC addresses 
of the Ethernet devices. 

Summary of Contents for SCALANCE W788-1PRO



















































































































































































































































































Reviews:

No comments

Related manuals for SCALANCE W788-1PRO

EAW MX250 Owner'S Manual preview
MX250
Brand: EAW Pages: 10
IEI Technology PCIE-Q470 Quick Installation Manual preview
PCIE-Q470
Brand: IEI Technology Pages: 19
IEI Technology KINO-DH420 User Manual preview
KINO-DH420
Brand: IEI Technology Pages: 87
IEI Technology HPE-4S2 Quick Installation Manual preview
HPE-4S2
Brand: IEI Technology Pages: 3
3Com 3CRSHPW196 User Manual preview
3CRSHPW196
Brand: 3Com Pages: 16
Q-See QC814 Specifications preview
QC814
Brand: Q-See Pages: 2
Datasheen D902AC User Manual preview
D902AC
Brand: Datasheen Pages: 25
ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series User Manual preview
ADSL/ADSL2/ADSL2+ Router 660R-6xC Series
Brand: ZyXEL Communications Pages: 282
Galaxy Hunter Series Quick Start Manual preview
Hunter Series
Brand: Galaxy Pages: 30
ZKTeco HVR0402 User Manual preview
HVR0402
Brand: ZKTeco Pages: 68
IBM CFFh Installation Manual preview
CFFh
Brand: IBM Pages: 34
Sans Digital ELITENAS EN104L+(B) Quick Installation Manual preview
ELITENAS EN104L+(B)
Brand: Sans Digital Pages: 9
Avaya ERS 5510 Technical Configuration Manual preview
ERS 5510
Brand: Avaya Pages: 73
Talent LT804-A Quick Installation Manual preview
LT804-A
Brand: Talent Pages: 18
Delta Electronics PFC Chokes PFC3515V Series Specification Sheet preview
PFC Chokes PFC3515V Series
Brand: Delta Electronics Pages: 1
Nvidia GEFORCE RTX 4090 Quick Start Manual preview
GEFORCE RTX 4090
Brand: Nvidia Pages: 160
Doro GW7001 Quick Installation Manual preview
GW7001
Brand: Doro Pages: 50
Watchguard Firebox T20 Hardware Manual preview
Firebox T20
Brand: Watchguard Pages: 21

Brands by name

Popular brands

Load more brands