Siemens SCALANCE W788-1PRO Operating Instructions Manual Download

Page: 191 / 274

Configuration Using Web Based Management and the Command Line Interface

C79000-G8976-C184-07

191

yntax of the Command Line Interface

CLI\BRIDG

scription

EVLAN\VLAN_ID>

Command De

info

Shows the currently configured VLANs and their
relationship to the ports.

add

<VLAN-ID>

[Ports]

]

Inse
Ports:

rts a new VLAN.

Specifies the ports

          configured for the VLAN.
u:       The port is a member of the VLAN.

sent without VLAN

th the VLAN ID 100. Ports 2 and 4

Frames are

tag.

Examples:
add 100 u 2 4
Creates an entry wi
are members of this VLAN.

edit

<VLAN-ID>

[Ports]

of ports in a VLAN. The

parameters correspond to those of the add command.
Examples:
edit 100 - 2

the V

Changes the membership

Port 2 no loner belongs to

LAN with ID 100.

delete

<VLAN-ID>

Deletes the VLAN with the specified VLAN ID from the

configuration of the SCALANC W78x.

ORTS>

Command Description

LI\BRIDGE\VLAN\P

info

Displays an overview of the po
VLAN settings.

r and corresponding

vlan

<Port> <E|D>

e specified port.

Enables / disables VLAN for th

portvid

<Port> <VLAN-ID>

LAN tag at the specified

LAN tag with the <VLAN-ID>.

Received frames without a V
port are given a V

portprio

<Port> <Priority>

ccording to

The priority assigned to untagge
802.1d.

d frames a

member

<Port> <all|specific>

er of all VLANs or only the

ID (specific, see above).

The specified port is a memb
VLAN configured in VLAN

Operating Instructions SCALANCE W78x

Summary of Contents for SCALANCE W788-1PRO



















































































































































































































































































Search results

Summary of Contents for SCALANCE W788-1PRO

Reviews:

Related manuals for SCALANCE W788-1PRO

Brands by name

Popular brands

Siemens SCALANCE W788-1PRO, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE W788-1PRO

Reviews:

Related manuals for SCALANCE W788-1PRO

Brands by name

Popular brands