Chapter 6
Certification
RUGGEDCOM RST2228
Installation Guide
40
Other Approvals
•
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Information Products
A copy of the Material Declaration is available online at
https://support.industry.siemens.com/cs/ww/en/
Section 6.1.8
Other Approvals
This device meets the requirements of the following additional standards:
•
IEC 61850-3
General Requirements
•
EN 50121-4
Railway Applications – Electromagnetic Compatibility – Emission and Immunity of the Signaling and
Telecommunications Apparatus
•
EN 50121-3-2
Railway applications – Electromagnetic compatibility – Part 3-2: Rolling stock – Apparatus
•
EN 50155
Railway applications – Rolling stock – Electronic equipment
•
NEMA TS-2
Traffic Controller Assemblies with NTCIP Requirements
Section 6.2
EMC and Environmental Type Tests
The RUGGEDCOM RST2228 has passed the following EMC and environmental tests.
EMC Type Test for IEC 61850-3
NOTE
• In the case of an all fiber port configuration, this product meets all Class 2 requirements. Otherwise,
all Class 1 requirements are met for copper ports.
• If the unit contains copper ports, the IEC 1613 conformance is Class 1, during which disturbance
errors may occur but recovery is automatic.
• If the unit contains all fiber ports, the IEC1613 conformance is Class 2, during which no disturbance
errors will occur.
Test
Description
Test Levels
Severity Levels
Enclosure Contact
± 8 kV
4
IEC 61000-4-2
ESD
Enclosure Air
± 15 kV
4
IEC 61000-4-3
Radiated RFI
Enclosure Ports
20 V/m
Note
a
IEC 61000-4-4
Burst (Fast Transient)
Signal Ports
± 4 kV at 2.5 and 5 kHz
Note
a
