RUGGEDCOM MX5000
Installation Guide
Chapter 1
Introduction
Description
3
4
3
5
6
1
1
2
Figure 2: Front Panel
1.
Power Supply Module Indicator LEDs
2.
Alarm Indicator LEDs
3.
Utility USB Port
4.
Management Ethernet Port
5.
Lamp Test/Alarm
Cut-Off (LT/ACO) Button
6.
RS232 Serial Console Port (DB9)
Figure 3: Front Panel – Fan Controller Option
Power Supply Module Indicator LEDs
Indicate the status of the power modules.
• I = The power supply is receiving power
• O = The power supply is supplying power
Alarm Indicator LED
Indicates when an alarm condition exists.
• Green = Alarms cleared/acknowledged
• Red = Alarm
Lamp Test/Alarm Cut-Off (LT/ACO) Button
This button performs two functions:
• Press and hold this button to test all indicator LEDs
• Press and release this button to acknowledge an active alarm
Management Port
This 10/100Base-T Ethernet port is used for system management that is out-of-band from the
switch fabric.
Utility USB Port
Use the USB port to upgrade the RUGGEDCOM ROX II software or install files, such as
configuration files and feature key files. For more information, refer to the
RUGGEDCOM ROX
II User Guide
for the RUGGEDCOM MX5000.
