Siemens OP15 Equipment Manual Download Page 61

Page: 61 / 177

7-11

Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618

Choose the standard screen System

→

SysMsg.

The messages contained in the system message buffer are now shown on the
display together with details of the message number, and the date and time of
their occurrence:

Message No: 200 on 08.12.92 10:23:50
Message No: 200 on 08.12.92 10:24:00

Figure 7-4

Example Display of System Message Buffer (Shown here for OP15/A)

Explanation relating to example display (first message):

Using the UP and DOWN arrow keys, you can now scroll through the list of
system messages.

Message No.

Details relating to next field:
Message number of the system message.

200

The displayed message number is number 200.

date time

Date and time of occurrence of the system message.

Display message text of selected system message:

Return to system message list:

Viewing the
system message
buffer

Message Handling

Summary of Contents for OP15












































































































































































Search results

Summary of Contents for OP15

Reviews:

Siemens OP15, Equipment Manual, Page: 61 / 177

Search results

Summary of Contents for OP15

Reviews: