Siemens OP15 Equipment Manual Download Page 120

Page: 120 / 177

17-6

Manual OP5, OP15

( ) J31069-D0840-U001-A2-7618

17.4 External Floppy Disk Station (Option for OP15)

The floppy disk station offers the following functions.

Read floppy disk directory

Store data records

Read in data records

Delete files

The interface parameters on the OP are automatically set to permanently spe-
cified values for accesses to the floppy disk station. These values cannot be
configured.

The operator functions are integrated centrally in the OP.

The external floppy disk station is connected to the printer interface of the
OP with standard cables.

The same type of interface must be used which was configured for the printer
interface (i.e., TTY or V.24).

To permit operation of a printer despite a connected floppy disk station, this
can be looped through.

Functions

Use

Connection

Printer operation

Device Description

Summary of Contents for OP15












































































































































































Search results

Summary of Contents for OP15

Reviews:

Siemens OP15, Equipment Manual, Page: 120 / 177

Search results

Summary of Contents for OP15

Reviews: