Siemens OP15 Equipment Manual Download Page 112

Page: 112 / 177

16-4

Manual OP5, OP15

( ) J31069-D0840-U001-A2-7618

16.2 Start-up Behavior

OP starts up

Self test

Download mode

Yes

Initialization

Establish connection to PLC

Message level

No configuration
or did you press
key combination?

After the power supply has been turned on, the OP performs a self
test.
In the test, it checks the operability of the most important device
components and displays the test results.

If there is not a configuration on the OP, the OP switches automati-
cally to Download mode.

The OP then performs various internal initializations.

In this start-up phase, the OP attempts to establish a connection to
the PLC.

If communication is not possible – for example, because the cable
to the PLC has not been inserted – the OP displays a system mes-
sage.

After start-up, the OP is at message level.

Commissioning

Summary of Contents for OP15












































































































































































Search results

Summary of Contents for OP15

Reviews:

Siemens OP15, Equipment Manual, Page: 112 / 177

Search results

Summary of Contents for OP15

Reviews: