manualshive.com logo in svg

Siemens OP15, Equipment Manual, Page: 14 / 177

Share
Download
Siemens OP15 Equipment Manual Download Page 14

1-2

Manual OP5, OP15 

( ) J31069-D0840-U001-A2-7618

  

  

   

  

 

  

Figure 1-1

Configuration and Process Control Phase

Text which is required to be displayed on the OP has first to be created on the
PC/PU with ProTool/Lite and then transferred to the OP. If, for example, text
for display is required to comprise static and variable components, the vari-
ables have to be configured and the static text for explaining the variables has
to be entered – for example:

Temperature 

Variable_xx C of Furnace 1

Here, 

Temperature C of Furnace 1

 is the static text and 

Vari-

able_xx

 is the variable that is read from the memory area of the PLC.

You will find information on configuring the OP in the ProTool/ Lite User’s
Guide. The Communications User’s Guide provides information on connect-
ing the OP to the PLC.

Static and variable
text components

Further
information

Product Description

Summary of Contents for OP15


















































































































































































Reviews:

No comments