manualshive.com logo in svg

Siemens OP15, Equipment Manual, Page: 58 / 177

Share
Download
Siemens OP15 Equipment Manual Download Page 58

7-8

Manual OP5, OP15 

( ) J31069-D0840-U001-A2-7618

7.3.2

Scrolling through Waiting Messages at Message Level

If there are neither system messages nor unacknowledged alarm messages,
you can scroll at message level through the messages that have not yet de-
parted.

To scroll through the messages, use the following arrow keys at message level:

Next alarm message

Previous alarm message

Next event message

Previous event message

The message currently waiting will be displayed if you press ESCAPE

 

or

there is no operator input on the OP for one minute.

7.3.3

Viewing Event and Alarm Message Text

Irrespective of the current contents of the event or alarm buffer, all config-
ured event and alarm message text can be shown on the display. To do so,
proceed as follows:

Choose the standard screen Alarms 

→

 Text (to display alarm messages) or 

Events 

→

 Text (to display event messages).

By using the UP and DOWN arrow keys, you can now scroll through the list
of configured message text.

Scrolling through
messages

Displaying
messages

Message Handling

Summary of Contents for OP15


















































































































































































Reviews:

No comments