manualshive.com logo in svg

Siemens NK8237 MP4.81-01, Installation Manual, Page: 32 / 86

Share
Download
Siemens NK8237 MP4.81-01 Installation Manual Download Page 32

6 

Software installation 
Installation checklist 

 

32 
Building Technologies 

 

A6V10854379_a_en 

CPS Fire Safety 

 

30.11.2017 

 

8

 

Software installation 

The software installation includes the following: 

  Composer and basic tools for system configuration. 

  Additional tools: NW8202 (for IP configuration download), NW8204 (for 

maintenance and diagnostic), NK823x Web Server (for NK8237 diagnostic 

information and IP configuration). 

  IEC GW Add-on installation 

8.1

 

Installation checklist 

Items needed for the installation 

  DMS8000 DVD 

  DMS8000 Service key (dongle) - not required for Composer GW Tool 

(NK8237) setup type 

  Service key license PAK code (or the REG file that contains it) - not required 

for Composer GW Tool (NK8237) setup type 

  IEC GW Add-on: MM8000 MP4.81 - Addon N.10 (IEC GW - V.1.01) - CD 

Installation checklist 

1.  Install the Composer Software and, if required, the license key and PAK. 

If necessary, you can refer to the following documentation: 
–   

Composer Technical Manual (A6V10062401) 

–   

MM8000 Installation, Configuration & Commissioning (A6V10062413) 

–   

DMS8000 Network Connectivity Guide (A6V10359485) 

–   

MM8000 Release Notes (A6V10062509) 

3.  Install the NK8237 unit and configure the IP address of the NK8237 unit, you 

can use the NK823x Web Server [➙ 36] (that is pre-installed on the SD card of 

the NK8237 units or can be installed during the update of the kernel [➙ 69]) or 

install the NW8202 tool [➙ 38]. 

4.  Install the NK8237 IEC GW Add-on [➙ 33]. 
5.  Update the NK823x firmware [➙ 64]: 

First download the firmware NK823x_4.81_Build_6x, and as second step the

 

AddOn_NK8237_IEC_Build_1x 

6.  If required for diagnostics, install the NW8204 tool [➙ 39]. 

8.2

 

Composer tool 

Composer tool can be installed using the standard DMS8000 DVD. 
If only NK8237 commissioning is needed, you can choose the Composer GW Tool 

(NK8237) installation option, which is a light version of Composer with only the 

functionalities required for commissioning. The Composer GW Tool version needs 

no license. 
A full-feature version of Composer is installed along with the following installation 

types, all requiring a license: 

   Composer and Subsystem Tools. This option installs the standard version of 

Composer with all functionalities required to commissioning MM8000, MK8000 

or NK8000 products. 

   Stand-alone (MM8000). This option installs the MM8000 Server and Client and 

the standard version of Composer with all functionalities required to 

commissioning MM8000 and NK8000 products. 

Summary of Contents for NK8237 MP4.81-01























































































Reviews:

No comments