manualshive.com logo in svg

Siemens MOBY I ASM 421, Technical Description

Share
Download
Siemens MOBY I ASM 421 Technical Description Download Page 69

ASM 421 Technical Description

6GT2 097-3AH00-0DA2

– 67 –

RD: 03/02

6GT2 002-0DA00

ASM 421 / V.24

Subject to change without notice!

6GT2 002-0DB00

ASM 421 / RS422

6GT2 002-0DC00

ASM 421 / TTY

J31069-D0142-U001-A0-7618

8

Warnings

Hazardous voltages are present in this equipment during operation.

To ensure safe operation of the equipment, maintenance shall only be
performed by qualified personnel in accordance with the instructions
in the MOBY catalog

1

 and technical description.

Failure to observe these instructions can result in death, severe perso-
nal injury or substantial damage to property.

The following instructions and those on all product labels must be
followed when carrying out any maintenance work.

Always disconnect and earth the equipment before starting
any maintenance.

Use only spare parts authorized by the manufacturer.

The servicing intervals as well as the instructions for repair
and replacement shall be duly observed.

A lithium battery is contained in mobile data memories with
RAM. The following instructions must be observed:

To avoid the risk of fire, explosion and severe burns, the bat-
tery should not be recharged, dismantled, exposed to heat
over 100 degrees Celsius, ignited, or brought into contact
with water.

The special instructions must be followed when using heat-resistant
data storage media.

1

Should you not be in possession of the MOBY catalog, it can be
obtained through your local Siemens office.

Warning

English

!

Beim Betrieb elektrischer Geräte stehen zwangsläufig bestimmte
Teile dieser Geräte unter gefährlicher Spannung.

Sicherer Betrieb der Geräte setzt voraus, dass diese von qualifizier-
tem Personal sachgemäß unter Beachtung der im MOBY-Katalog

1

und der technischen Beschreibung enthaltenen Hinweise eingesetzt
werden.

Bei Nichtbeachtung können Tod, schwere Körperverletzung oder er-
heblicher Sachschaden die Folge sein.

Beachten Sie daher auch bei Instandhaltungsmaßnahmen an diesem
Gerät alle hier und auf dem Produkt selbst aufgeführten Hinweise.

Vor Beginn jeglicher Arbeiten ist das Gerät vom Netz zu tren-
nen und zu erden.

Es dürfen nur vom Hersteller zugelassene Ersatzteile verwen-
det werden.

Die vorgeschriebenen Wartungsintervalle sowie die Anwei-
sungen für Reparatur und Austausch sind unbedingt einzuhal-
ten.

Bei einem mobilen Datenspeicher mit RAM ist eine Lithium-
batterie integriert, hierzu sind folgende Hinweise zu beachten:

Vermeiden Sie das Risiko von Feuer, Explosionen und schwe-
ren Verbrennungen. Die Batterie darf nicht nachgeladen, aus-
einandergebaut, über 100

°

 Celsius erwärmt, entzündet oder

ihr Inhalt mit Wasser in Berührung gebracht werden.

Beim hitzefesten Datenträger sind die besonderen Hinweise zu be-
rücksichtigen.

1

Sollten Sie nicht im Besitz des MOBY-Katalogs sein, so kann er
über jede örtliche SIEMENS-Niederlassung bestellt werden.

Deutsch

Warnung

!

Summary of Contents for MOBY I ASM 421







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands