Approvals
IE/PB LINK PN IO
82
Operating Instructions, 11/2017, C79000-G8976-C393-02
IECEx
The product meets the requirements of explosion protection according to IECEx.
IECEx classification: Ex nA IIC T4 Gc
The product meets the requirements of the following standards:
●
EN 60079-0
Hazardous areas - Part 0: Equipment - General requirements
●
EN 60079-15
Explosive atmospheres - Part 15: Equipment protection by type of protection 'n'
ATEX
The product meets the requirements of the EC directive 94/9/EC "Equipment and Protective
Devices for Use in Potentially Explosive Atmospheres".
Applied standards:
●
EN 60079-0
Hazardous areas - Part 0: Equipment - General requirements
●
EN 60079-15
Explosive atmospheres - Part 15: Equipment protection by type of protection 'n'
ATEX approval: II 3 G Ex nA II T4
Test number: KEMA 10 ATEX 0166X
Over and above this, the following conditions must be met for the safe deployment of the
product; see section Notes on use in hazardous areas according to ATEX / IECEx
(Page 33).
You should also note the information in the document "Use of subassemblies/modules in a
Zone 2 Hazardous Area" that you will find on the supplied data medium with the
documentation.
For information on the EU declaration of conformity see above.
Electromagnetic compatibility (EMC directive)
The product meets the requirements of the EC Directive:2004/108/EEC "Electromagnetic
Compatibility" according to the following standards:
●
EN 61000-4
Emission - industrial area
●
EN 61000-2
Immunity - industrial area
