Initial startup of HiPath HG 1500
Startup
For internal use only
A31003-K5020-S100-6-7620
3-4
Service Manual
lan2de.c03
3.2 Configuration for gatekeeper mode
Figure 3-1
Installation for gatekeeper mode
The following stations must be differentiated from the user’s viewpoint:
Group 1
: stations directly connected to the Hicom (Optisets, POT, CMI, ...), stations
registered at HiPath HG 1500 (C55 Opti clients, vCAPI clients) and all trunk access-
es.
Group 2
: stations registered at the gatekeeper (H.323 standard clients such as Net-
meeting 3.01, HiNet LP5100, HiNet TA1100, etc.).
Note
In order to reach a port (station/line) of group 1, all stations of group 2 must dial an
additional code. This code is deleted in the direction to the Hicom by HiPath HG 1500
and inserted for traffic in the reverse direction, i.e., stations of group 1 do not dial the
code.
The code must be set up in the RADVision Gatekeeper NGK100 as a service and in
HiPath HG 1500 as a gateway prefix.
LAN
Hicom 150 E Office
H.323 GK
HFA client
H.323 client
Administration
HXGM/HXGS
LP5100
Optiset 100
200
300
201
Group 1
Group 2
HiPath HG 1500
