Initial startup of HiPath HG 1500
Startup
For internal use only
A31003-K5020-S100-6-7620
3-2
Service Manual
lan2de.c03
Note
The CHAP user ID and password are identical to the
first
user name and password
of the Hicom user group system administration (generally 31994/31994).
3.1.2 Startup via ARP
HiPath HG 1500 can be assigned an IP address using a static entry in the ARP table
of the Administration PC.
Prerequisites
The network card with the TCP/IP protocol must function correctly. The Xpress @LAN
assistant must be installed on the PC.
Note
These settings are temporary and are only stored permanently on the board on entry
to the customer database. The HiPath HG 1500 default IP address (10.144.233.63)
is reserved for startup and cannot be used as a permanent IP address in the network.
Security note
As long as a customer database has not been transferred to the board, the process
described above can be used by every PC in the LAN.
5.
HiPath HG 1500 can now be administered remotely with Assistant Xpress
@LAN/HG 1500.
Step
Task
1.
In the MS-DOS command window,
enter the command
arp -s ipadresse macadresse
(Format example: arp -s 192.168.100.245 08-00-06-0f-ec-04)
The board MAC address is indicated on the adhesive label on the board.
2.
From the MS-DOS command window ping HiPath HG 1500 using the new
IP address. If the ping has been answered successfully by HiPath HG
1500, administration of this PC can proceed.
Step
Task
