background image

57

Gigaset SE681 WiMAX – Free software

Gigaset SE681 WiMAX / engbt / A31008-N923-R101-2x-7619 / Licences.fm / 27.3.08

Sc

hablone 2

007_

10_1

9

Gigaset SE681 WiMAX – Free software 

The Gigaset SE681 WiMAX contains, among other things, free software that was devel-
oped by third parties and is protected by copyright. 
The software is provided free of charge. You are authorised to use this free software in 
accordance with the relevant licence conditions. In the event of contradictions between 
these licence conditions and the licence conditions that apply for the software accord-
ing to Siemens Home and Office Communication Devices GmbH & Co. KG, the above-
mentioned licence conditions shall take precedence for the free software. 
Use of the free software contained in this product extending beyond the program 
sequence intended by Siemens is at the user's own risk – i.e. without a claim against 
Siemens based on liability for defects. 
You shall have no right to assert a claim against Siemens based on liability for defects, 
if a defect in the product is or could be due to changes you have made to the programs 
or their configuration. Furthermore, you shall have no right to assert a claim against 
Siemens based on liability for defects if the free software infringes the copyright of third 
parties.
Siemens shall not provide technical support for the software, including the free 
software included within it, if it has been changed.

Summary of Contents for GIGASET SE681 WIMAX









































































Reviews: