Siemens GIGASET SE681 WIMAX User Manual Download Page 44

Page: 44 / 72

Gigaset SE681 WiMAX / engbt / A31008-N923-R101-2x-7619 / Browser_configuration.fm / 27.3.08

hablone 2

007_

10_1

Firefox 2.0:

Open Firefox.

Click on

Tools

and then on

Settings

Click on

Advanced

Open the

Network

tab and click on

Settings

in the

Connection

area.

Select either

Direct connection to the Internet

Manual proxy configuration

If you have chosen

Manual proxy configuration

, in the

No proxy for:

field, enter

the IP block in which the IP address of your Gigaset SE681 WiMAX is found:

192.168.2.0/24

Click on

and then

again to close the

Settings

window.

Allowing JavaScript and Java

Internet Explorer 7.0:

Open Internet Explorer.

Click on

Tools

and then on

Internet Options

Open the

Security

tab.

Select the

Local Intranet

entry as the Web content zone.

Click on the

Sites

button.

Select the

Include all sites that circumvent the proxy server

entry.

Click on

and then

again to apply the settings.

Firefox 2.0:

Open Firefox.

Click on

Tools

and then on

Settings

Click on

Content

Check the

Activate JavaScript

and

Activate Java

boxes.

Click on

to apply the settings.

Summary of Contents for GIGASET SE681 WIMAX









































































Search results

Summary of Contents for GIGASET SE681 WIMAX

Reviews:

Related manuals for GIGASET SE681 WIMAX

Brands by name

Popular brands

Siemens GIGASET SE681 WIMAX, User Manual

Search results

Summary of Contents for GIGASET SE681 WIMAX

Reviews:

Related manuals for GIGASET SE681 WIMAX

Brands by name

Popular brands