Siemens GIGASET SE681 WIMAX User Manual Download Page 12

Page: 12 / 72

Product overview

Gigaset SE681 WiMAX / engbt / A31008-N923-R101-2x-7619 / Product_intro.fm / 27.3.08

hablone 2

007_

10_1

LEDs

The LEDs indicate the status of the Gigaset SE681 WiMAX and the current signal
strength.

Name

LED

Meaning

Power

: power

supply

Lights up green

The Gigaset SE681 WiMAX is powered cor-
rectly.

Does not light up The Gigaset SE681 WiMAX is not powered

correctly or the power supply has failed.

Online

: active

connection

Lights up green

The Gigaset SE681 WiMAX is registered with
a WiMAX network and ready for use.

Does not light up The Gigaset SE681 WiMAX is

not

registered

with a WiMAX network; it is not possible to
establish an Internet connection.

Flashes green

The Gigaset SE681 WiMAX is establishing a
connection with a WiMAX network.

Lights up red

The Gigaset SE681 WiMAX is not ready. Pos-
sible cause: device is overheating or faulty.

LAN

: Ethernet

port

Lights up green

Correct cable connection with a powered
connection partner.

Does not light up No or incorrect cable connection.
Flashes green

Data transfer via the Ethernet port.

RSSI

: signal

strength

0 to 4 LEDs light
up green

The LEDs on the Gigaset SE681 WiMAX help
you to position the antenna more easily. The
LEDs indicate the signal strength; the more
LEDs that light up, the better the signal
reception.

All 4 LEDs flash
green

The Gigaset SE681 WiMAX is being reset to
the factory settings; see "Returning the
Gigaset SE681 WiMAX to factory settings" on
page 19.

RSSI

: signal strength

LAN

: Ethernet port

Online

: active connection

Power

: power supply

Summary of Contents for GIGASET SE681 WIMAX









































































Search results

Summary of Contents for GIGASET SE681 WIMAX

Reviews:

Related manuals for GIGASET SE681 WIMAX

Brands by name

Popular brands

Siemens GIGASET SE681 WIMAX, User Manual

Search results

Summary of Contents for GIGASET SE681 WIMAX

Reviews:

Related manuals for GIGASET SE681 WIMAX

Brands by name

Popular brands