Siemens Gigaset S680 User Manual Download Page 63

Page: 63 / 78

Appendix

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / appendix.fm / 26.9.08

ion 4,

.09.

2005

Gigaset S685 only:

Base Search flashes in the display.

The handset is set to

Best Base

and no base sta-

tion is turned on or within range.

Move the handset closer to the base station.

Check the base station's mains adapter

(page 8).

Handset does not ring.

1. The ringer tone is deactivated.

Activate the ringer tone (page 51).

2. Call diversion set to

All Calls

Deactivate call diversion.

You cannot hear a ringer/dialling tone from

the fixed network.

The phone cord supplied has not been used or

has been replaced by a new cord with the

wrong jack connections.

Please always use the phone cord supplied

or ensure that the jack connections are cor-

rect when purchasing from a retailer

(page 8).

Error tone sounds after system PIN prompt.

You have entered the wrong system PIN.

Reset the system PIN to 0000 (page 58).

Forgetting the system PIN.

Reset the system PIN to 0000 (page 58).

Call charges are not displayed.

1. Your network provider does not support this

feature.

2. There are no metering pulses.

Ask your network provider to transmit

the metering pulses.

The other party cannot hear you.

You have pressed the

(INT) key. The hand-

set is "muted".

Activate the microphone again (page 18).

The number of the caller is not displayed

despite CLIP.

Calling Line Identification is not enabled.

The caller

should ask the network provider

to release Calling Line Identification (CLI).

You hear an error tone when keying an input

(a descending tone sequence).
Action has failed/invalid input.

Repeat the operation.
Watch the display and refer to the user

guide if necessary.

You cannot listen to messages on the net-

work mailbox.

Your phone system is set for pulse dialling.

Set your phone system to touch tone dial-

ling.

No time is specified for a message in the call

history.

Date/time is not set.

Set the date/time (page 10).

The answer machine reports "PIN is incor-

rect" to the remote control.

1. You have entered the wrong PIN

Enter the system PIN again

2. The system PIN is still set to 0000.

Change the system PIN (page 57).

The answer machine is not recording any

messages/has switched over to announce-

ment.

Its memory is full.

Delete old messages.

Play back new messages and delete.

Summary of Contents for Gigaset S680















































































Search results

Summary of Contents for Gigaset S680

Reviews:

Related manuals for Gigaset S680

Brands by name

Popular brands

Siemens Gigaset S680, User Manual

Search results

Summary of Contents for Gigaset S680

Reviews:

Related manuals for Gigaset S680

Brands by name

Popular brands