Siemens Gigaset S680 User Manual Download Page 59

Page: 59 / 78

Base station settings

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / registr_sett.fm / 26.9.08

ion 4,

.09.

2005

Resetting the system PIN

If you have forgotten your system PIN you

can reset the base station to the original

code

0000

Disconnect the power cord from the base

station. Hold down the registration/pag-

ing key on the base station while recon-

necting the power cable to the base sta-

tion. Release the key after a while.
The base has now been reset and the sys-

tem PIN

0000

set.

Changing ringer tones
(Gigaset S685 only)

Volume:
You can choose between five volumes

and the "crescendo" ring, see page 50.

Select "0" to deactivate the base station

ringer tone.

Ringer tones:
You can set a ringer tone melody for

external calls, see page 50.

Base

Ringer Settings

For how to adjust the settings, see

page 50.

Activating/deactivating
music on hold

Base

Music on hold

Press

§OK§

to activate or deactivate music

on hold ( = on).

Repeater support

With a repeater you can increase the range

and reception strength of your base sta-

tion. You will need to activate repeater

mode. This will terminate any calls that

are in progress at the time.

Precondition:

A repeater is registered.

Eco mode is disabled.

Base

Add. Features

Repeater Mode

§Yes§

Press the display key.

When repeater mode is active, the menu

item is marked with .

Restoring the base station to
the factory settings

When the settings are restored

eco mode is disabled,

handsets are still registered,

the system PIN is not reset.

Base

Base Reset

Enter the system PIN and press

§OK§

§Yes§

Press the display key.

Cancel the restoring process by pressing

or the display key

§No§

Press

and

hold

(idle status)

Please note:

All handsets are deregistered and must be re-

registered.

‰

Please note:

Repeater support and eco mode (see page 13)

rule each other out, i.e. both functions cannot

be used at the same time.

‰

Summary of Contents for Gigaset S680















































































Search results

Summary of Contents for Gigaset S680

Reviews:

Brands by name

Popular brands

Siemens Gigaset S680, User Manual

Search results

Summary of Contents for Gigaset S680

Reviews:

Brands by name

Popular brands