Siemens Gigaset S680 User Manual Download Page 32

Page: 32 / 78

SMS (text messages)

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / sms_BRD_neutral.fm / 26.9.08

ion 4,

.09.

2005

The display tells you if the SMS memory is

full.

Deleting SMS messages you no longer

require (page 31).

Incoming message list

The incoming message list contains:

All received SMS messages, starting

with the most recent.

SMS messages that could not be sent

due to an error.

New SMS messages are signalled on all

Gigaset S68H handsets by the

icon in

the display, the flashing message key

and an advisory tone.

Opening the incoming message list with

the

key

Press.

Select mailbox if necessary and enter mail-

box PIN.
The incoming message list is displayed as

follows (example):

bold:

number of new entries

regular:

number of read entries

2 Name of mailbox, here: general mailbox

Open list with

§OK§

An entry in the list is displayed as in the

following example:

Opening the incoming message list via the

SMS menu

(mailbox, mailbox PIN)

Incoming (2)

Reading or deleting individual SMS

messages

Open the incoming message list.

Continue as described in "Reading or

deleting individual SMS messages",

page 30.

After you have read a new SMS, it is given

the status "Old" (is no longer shown in

bold).

Deleting the incoming message list

All

new and old

SMS messages in the list

are deleted.

Open the incoming message list.

§Options§

Open

menu.

To continue, see "Deleting draft mes-

sage list", page 30.

Replying to or forwarding SMS

messages

Read the SMS (page 31):

§Options§

Press the display key.

You have the following options:

Reply

Write and send a reply SMS directly

(page 28).

Edit

Edit the text in the SMS and then send

it (page 29).

Forwarding an SMS

You are reading an SMS (page 31):

§Options§

Press the display key.

Forward

Select and press

§OK§

. For fur-

ther information, see page 29.

Adding numbers to the directory

Adding the sender's number

Open incoming message list and select

entry (page 31).

§Options§

Press the display key. For fur-

ther information, see page 23.

SMS: (2)

1
2

1234567890

21.11.07 09:45

Please note:

– You can create a special directory for SMS

messages within your main directory by

putting a star (*) before the names.

– An attached mail box identifier is added to

the directory.

Summary of Contents for Gigaset S680















































































Search results

Summary of Contents for Gigaset S680

Reviews:

Related manuals for Gigaset S680

Brands by name

Popular brands

Siemens Gigaset S680, User Manual

Search results

Summary of Contents for Gigaset S680

Reviews:

Related manuals for Gigaset S680

Brands by name

Popular brands