manualshive.com logo in svg

Siemens Gigaset M105 Data, Operating Instructions Manual

The Siemens Gigaset M105 Data comes with a comprehensive Operating Instructions Manual, providing users with essential guidance for optimal usage. This manual can be easily downloaded for free from our website, where we specialize in offering a vast collection of user manuals for various products.

Share
Download
background image

Introduction

A

5

Back

Meaning of "base" and "portable part"

This is an assignment in the DECT connection (Base FP = Fixed Part, 
PP=Portable Part) and refers exclusively to the air interface. A base is the 
same as a base station in Gigaset telephony. Here, portable part is the 
same as handset. This is defined, for example, through the registration 
option. Only one Gigaset M105 Data "Portable part" can have an active 
connection to a Gigaset 3070/75isdn or a Gigaset M101/M105 Data 
"Base". Up to 6 portable parts or up to 6 bases can be registered (multi-
link operation).

Contents of the package

1.

Gigaset M105 Data

2.

CD-ROM with the installation program and operating instructions

3.

Installation brochure

4.

USB cable

The Gigaset Repeater cannot be used to extend the radio 
range for Gigaset M105 Data, although it can for Gigaset hand-
sets.

Summary of Contents for Gigaset M105 Data













































Reviews:

No comments

Related manuals for Gigaset M105 Data

Brands by name

Popular brands

Load more brands