manualshive.com logo in svg

Siemens Gigaset M105 Data, Operating Instructions Manual

The Siemens Gigaset M105 Data comes with a comprehensive Operating Instructions Manual, providing users with essential guidance for optimal usage. This manual can be easily downloaded for free from our website, where we specialize in offering a vast collection of user manuals for various products.

Share
Download
background image

Configuration program options

A

23

Back

There are five possible operating modes for every Gigaset M101/M105 
Data:

1.

Direct connection

: this operating mode is implemented for all devices 

that are not controlled with AT or AVM-compatible

 

commands

2.

AT commands (PC)

 or 

AVM compatible (PC)

: this is the operating 

mode for the local adapter. The Gigaset M105 Data unit determines the 
conditions on the serial interface in the same way as a modem. In addition 
to the data, the transmission parameters are also transmitted to the Re-
mote adapter which then transfers the data to the connected device.

3.

AT commands (device)

 or 

AVM compatible (device)

: in this operating 

mode, the remote adapter controls a terminal that understands AT com-
mands.

Summary of Contents for Gigaset M105 Data













































Reviews:

No comments

Related manuals for Gigaset M105 Data

P&E Microcomputer Systems USB-ML-PPCNEXUS Summary Manual preview
USB-ML-PPCNEXUS
Brand: P&E Microcomputer Systems Pages: 5

Brands by name

Popular brands

Load more brands