manualshive.com logo in svg

Siemens Gigaset M105 Data, Operating Instructions Manual

The Siemens Gigaset M105 Data comes with a comprehensive Operating Instructions Manual, providing users with essential guidance for optimal usage. This manual can be easily downloaded for free from our website, where we specialize in offering a vast collection of user manuals for various products.

Share
Download
background image

Tips&tricks, settings

A

26

Back

PC-PC direct cable connection: via RS232/V.24 interface

The problem that often occurs with PC-PC direct cable connection is in-
correct baud rate setting. The following section describes the configura-
tion of a PC-PC direct cable connection at a Win95 system (similar for 
WIN98).

Before using the actual Gigaset M105 Data unit, application functionality 
should be checked using a direct connection (with a null-modem cable). 
After the test, remove the null-modem cable and install the cable sup-
plied. This accelerates fault detection and clearance. If this is not possi-
ble, the precise configuration is to be examined.

z

The Gigaset M105 Data unit can be set to a fixed baud rate (direct con-
nection 115200 bps with HW handshake).

Setting the direct connection to the correct baud rate

1.

Open the terminal program

First of all, open a terminal program (e.g. Win95 HyperTerminal via 
Hypertrm.exe) at both PCs and ensure that the correct COM port is being 
accessed.

Set up a direct connection via COMx (COM 1 was selected in the exam-
ple). The virtual COM port must be selected when using the Gigaset 
M105 Data.

Summary of Contents for Gigaset M105 Data













































Reviews:

No comments

Related manuals for Gigaset M105 Data

Brands by name

Popular brands

Load more brands