6
First Steps
Gigaset E450 Eco / IM-Nord EN / A31008-M1702-R211-1-SM19 / starting.fm / 18.10.2008
Connecting the base station
¤
First
connect the mains adapter and
then
the phone jack as shown below-
and place the cables in the cable
recesses.
1 Underside of the base station (detailed
view)
2 Mains adapter 230 V
3 Phone jack with phone cord
Please note:
u
The mains adapter must be
always
connected
, as the phone will not oper-
ate without mains connection.
u
If you buy a replacement phone cord
from a store, ensure that the phone
jack is connected correctly.
Setting up the handset for use
Fitting the battery pack
¤
Insert the plug into the socket as shown
in the enlarged view.
¤
Insert the battery pack.
¤
Place the cords in the cord routing.
Correct phone jack assignment
1 unused
2 unused
3 a
4 b
5 unused
6 unused
1
3
2
1
1
1
3
2
1
4
5
6
Caution:
Use only the rechargeable battery pack recom-
mended by Gigaset Communications GmbH
*
(page 45). Never use a conventional (non-
rechargeable) battery pack, as this may cause
significant damage to health and property. For
example, the outer casing of the battery pack
could be destroyed or the battery pack could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type.
* Gigaset Communications GmbH is a trademark
licensee of Siemens AG.