35
Using several handsets
Gigaset E450 Eco / IM-Nord EN / A31008-M1702-R211-1-SM19 / registr_sett.fm / 18.10.2008
Activating the room monitor and
entering the number to be called
v
¢
í
¢
Room Monitor
¤
Change multiple line input:
Room M.:
Select
On
to activate.
Call to:
Press the display key
§Edit§
and enter des-
tination number.
External number:
select number from
the directory or enter directly. Only
the
last 4 digits
are displayed.
Internal number:
delete any stored
external number.
§INT§
s
(select hand-
set or
Call All
, if all registered handsets
are to be called)
§OK§
.
Store number with
§Save Entry§ §OK§
.
Level:
Set noise level sensitivity (
Low
or
High
).
¤
Save changes (page 47).
The function is now activated. With
v
,
you can move directly to settings.
Changing previously set external
destination number
v
¢
í
¢
Room Monitor
s
Scroll to the
Call to:
line.
§Edit§
Press the display key.
X
Delete existing number.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 35).
¤
Save changes (page 47).
Changing previously set internal
destination number
v
¢
í
¢
Room Monitor
s
Scroll to the
Call to:
line.
§Edit§
Press the display key.
§Yes§
Press the display key to con-
firm the prompt.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 35).
¤
Save changes (page 47).
Deactivating the room monitor
remotely
Important
: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Take the call from the room monitor
and press keys
9
;
.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings on the handset (e.g. no ring-
tone) will however remain activated until
you press the display key
§Off§
on the hand-
set.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
§Save§
.