GLOBAL VOICE
5-13
CHAPTER 5
|
FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL
5.
If no Speaker Group switches are pressed for 120 seconds, the system
automatically returns to normal.
6.
Depress the key on the convenience page microphone.
7.
The LED on the selected Speaker Group switch turns steady green indicat-
ing that the speaker group is now turned on.
8.
The operator can now speak and make the page to the selected speaker
groups.
9.
During the page, the operator can briefly (for up to five seconds) unkey and
then re-key the microphone (for example, to cough) - without re-initiating
the pre-announce tone.
10. To end the convenience page, the operator simply unkeys and replaces the
microphone. The Ready to Page LED turns off.
11. All Speaker Group switch LEDs turn from steady green to flashing green.
12. To return the system to normal, the operator first depresses the selected
Speaker Group switches, then Select Convenience Page. If these switches
are not deselected, the system will return to normal automatically in
approximately 1-2 minutes and turn off the Select Convenience Page and
selected Speaker Group LEDs.
Background Music
The Background Music operation consists of the following functions which are
described below: All Background Music and Select Background Music.
All Background Music
All Background Music sends the background music, with a single switch press, from
an audio source (CD player, tuner or tape recorder, etc.) to all speaker groups in the
local PMI/PMI-2/PMI-3 only.
Global All Background Music sends the background music from an audio source to all
speaker groups across all PMI/PMI-2/PMI-3 nodes in the system.
To select All Background Music, follow the steps listed below.
1.
Turn on the background music source.
2.
Depress the All Background Music switch.
3.
The All Background Music, Display Background Music, Select Background
Music and the Speaker Group switch LEDs turn on steady green.
4.
All speaker groups sound background music.
5.
After 120 seconds the Speaker Group switch LEDs turn off and the Display
Background Music switch LED automatically turns on.
6.
To end the background music depress the All Background Music switch
again.
7.
The All Background Music, the Display Background Music, Select Back-
ground Music and the Speaker Group switch LEDs turn off.
