Siemens FC18 Series Operating Manual Download Page 69

Page: 69 / 70

Operating Manual of FC18 Controller

Page: 68/70

APPENDIX 6

“

STICKER METHOD

”

EASY FOR COMMISSIONING

In FC18 system, each field device has a unique ID number. Engineer can tear it down when installing, and fix to the equipment

position in engineering drawings, so that after finishing installation of all devices, engineer file configuration can be made.

Detailed procedures are as follows:

Open the package.

Tear down the machine-readable ID number.

Fix it to the corresponding position in engineering drawings.

After all installation complete, turn on the system, and controller will find all new devices.

Now the system is “auto configured” able to generate alarms and fault with default settings.

Upload the data to PC, and configure through debug tool software in PC:

Choose the device.

Enter text information or choose corresponding technical parameters (such as sensitivity).

After configuration, download configuration file to controller and complete the configuration job.

APPENDIX 7 GLOSSARY

Fig7-1

Abbreviation

Description

FRT

Floor repeater display

Mimic driver

Mimic display panel and mimic display board

Summary of Contents for FC18 Series







































































Search results

Summary of Contents for FC18 Series

Reviews:

Related manuals for FC18 Series

Brands by name

Popular brands

Siemens FC18 Series, Operating Manual

Search results

Summary of Contents for FC18 Series

Reviews:

Related manuals for FC18 Series

Brands by name

Popular brands