Siemens FC18 Series Operating Manual Download Page 41

Page: 41 / 70

Operating Manual of FC18 Controller

Page: 40/70

22.

HOW TO CHECK SYSTEM

Function:

To check whether the LCD, indicators, printer and the buzzer can

work normally.

Steps:

Press “Menu” to browse the main menu (Fig. 21-1).

Main menu displayed.

Press “

→

” to pop out the "Tool" submenu (Fig.21-2). Press "

↓

" to select

“Check System" and press “OK” to display the checking system window

(Fig.21-3). Press "OK" to examine the system.

LCD: Flash in white and black once for each. It's normal if there is no

black spot.

Indicator: All indicators flashing.

Buzzer: Rings in 4 different sounds.

Printer: Print "successful test!" automatically.

After finishing checking system, it will return to the original interface.

Fig.21-1

Fig.21-2

Fig.21-3

Summary of Contents for FC18 Series







































































Search results

Summary of Contents for FC18 Series

Reviews:

Related manuals for FC18 Series

Brands by name

Popular brands

Siemens FC18 Series, Operating Manual

Search results

Summary of Contents for FC18 Series

Reviews:

Related manuals for FC18 Series

Brands by name

Popular brands