Siemens ET6 LNV1 Series, User Manual, Page: 16 / 24

en
Hob-based hood control
16
14.5 Remote diagnostics
Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Tip:
For further information and details about the avail-
ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com
14.6 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
Home Connect server (initial registration):
¡
Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi
communication module installed).
¡
Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡
The current software and hardware version of your
appliance.
¡
Status of any previous reset to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.
Note:
Please note that the Home Connect functions
can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.
14.7 Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the appli-
ance with Home Connect functionality meets the essen-
tial requirements and other relevant provisions of the
Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.siemens-home.bsh-group.com among
the additional documents on the product page for your
appliance.
2.4 GHz band: 100 mW max.
5 GHz band: 100 mW max.
BE BG CZ DK DE EE IE EL
ES FR HR IT CY LV LT LU
HU MT NL AT PL PT RO SI
SK FI SE UK NO CH TR
5 GHz WLAN (Wi-Fi): For indoor use only.
15 Hob-based hood control
If both appliances are Home Connect-compatible, the
easiest way to connect the appliances is in the
Home Connect app. To do this, connect the two appli-
ances to Home Connect and follow the instructions in
the app.
Alternatively, you have the following options for
connecting the appliances together:
¡
Connecting appliances together directly.
→
Page 16
¡
Connecting appliances via the WLAN home net-
work.
→
Page 16
Note:
In networked standby mode, the appliance re-
quires a maximum of 2 W.
15.1 Connecting appliances together
directly
Connect the appliance directly to your extractor hood
to control the hood via the hob. A connection to the
home network and the app is no longer possible for
both appliances.
Note:
Note the information for connecting the hob in
the instruction manual for your extractor hood.
Requirement:
The extractor hood is switched off.
1.
Switch on the hob.
2.
Press and hold for 4 seconds.
a
The display will show the product information.
3.
Touch repeatedly until the display alternately
shows and ⁠ ⁠.
a lights up in the hotplate display.
4.
Set the value on the control panel.
a
flashes on the hotplate display.
5.
You now have two minutes to start the connection
process on the extractor hood.
a Once the connection has been established, lights
up on the cooking zone display.
6. Exit the basic settings.
a
The control panel shows the symbols for hob-based
hood control.
15.2 Connecting appliances via the WLAN
home network (Wi-Fi)
Connect the appliances via Wi-Fi in order to control the
extractor hood via the hob. It is also possible to con-
nect to the Home Connect app.
Note:
The appliances can only be connected when
both are connected to the home network and are sim-
ultaneously engaged in connecting. If the time allowed
for connecting has already expired for one of the two
appliances, start the connection process again.