Siemens ET6 LNV1 Series, User Manual, Page: 12 / 24

en
Automatic switch-off
12
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the preselected cooking time counts down. When the
cooking time has elapsed, the hotplate switches off
automatically.
Switch on the automatic timer in the basic settings.
→
Page 13
Tip:
The automatic timer is valid for all hotplates. You
can reduce or delete the cooking time for individual
hotplates.
→
Page 11
8.2 Kitchen timer
You can set a time of up to 99 minutes after which a
signal will then sound. The kitchen timer runs inde-
pendently of all other settings.
Setting the kitchen timer
Requirement:
The hob must be switched on.
1.
Touch ⁠.
a The indicator lights up.
a
lights up on the timer display.
2. Set the time on the control panel.
a
The timer starts counting down after a few seconds.
a When the set time has elapsed, a signal sounds.
flashes on the timer display. The indicator
flashes.
a
The display switches off after 10 seconds.
Switching off the timer signal
You can switch the signal off manually.
▶
Touch any touch field.
a The display goes out and the audible signal ceases.
Setting the correct time
1.
Select the kitchen timer with .
2.
Set the required time on the control panel.
8.3 Stopwatch function
The stopwatch function displays the time which has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the stop-
watch function is switched off as well.
Switching on the stopwatch function
▶
Touch ⁠.
a
appears on the timer display.
a
Time measurement begins.
a Seconds are displayed during the first minute, then
minutes.
Note:
If you select another time-setting option in addi-
tion to the stopwatch function, the setting appears on
the timer display for 10 seconds. The stopwatch func-
tion is then displayed again.
Switching off the stopwatch function
▶
Touch again.
a
The timer display goes out.
9 Automatic switch-off
If you do not change the settings of a hotplate for a
long time, automatic switch-off will be activated.
When the hotplate switches off depends on the heat
setting selected (1 to 10 hours).
The heat to the hotplate is switched off.
and the re-
sidual heat indicator ⁠/ flash alternately on the hot-
plate display.
9.1 Continuing cooking after automatic
switch-off
1.
Touch any control.
a The display goes out.
2.
Reset.
10 Keep-warm function
The keep-warm function allows you to melt chocolate
or butter and to keep food or cookware warm.
10.1 Switching on the keep-warm function
1.
Touch ⁠.
2.
Select the hotplate.
a
lights up on the heat setting display.
10.2 Switching off the keep-warm function
1.
Touch ⁠.
2.
Select the hotplate.
a
lights up on the heat setting display.
11 Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
The main switch is excluded from the wipe protection
function. You can switch the hob off at any time.
11.1 Activating wipe protection
▶
Touch .
a
A signal sounds.
a lights up brightly.
a
The control panel is locked for 30 seconds.