Siemens DI 16x24VDC HF, Equipment Manual

Page: 41 / 46

Channel parameters
Each channel parameter block contains the cable parameters for the digital input (4 bytes).
The following figure shows the configuration of the channel parameters for channels 0 to 15.
x = 12 + (channel number * 4); with channel number 0…15
All unused bits and the bits or bytes marked as "reserved" must be set to zero.
You activate a channel parameter by setting the corresponding bit to "1" or the corresponding
value.
(QDEOHGLDJQRVWLFV
%\WH[
%\WH[
6KRUWFLUFXLWWRJURXQG
:LUHEUHDNFKHFN
,QSXWGHOD\
1RQH
PV
PV
PV
PV
PV
PV
PV
PV
1RQH
V
V
V
V
V
V
+DUGZDUHLQWHUUXSWULVLQJHGJH
+DUGZDUHLQWHUUXSWIDOOLQJHGJH
:LUHEUHDN
%\WH[
3XOVHVWUHWFKLQJ
5HVHUYHG
%\WH[
&KDQQHODFWLYDWHG
'LVDEOH
(QDEOHG
'LVDEOH
(QDEOHG
'LVDEOH
(QDEOHG
Figure A-3 Configuration byte x to x+3 for the channels 0 to 15
Drivers, parameters, diagnostics messages and address space
A.2 Parameter assignment and structure of the module/channel parameters
DI 16x24VDC HA
Equipment Manual, 10/2020, A5E39265608-AD
41