Siemens DI 16x24VDC HF, Equipment Manual

Page: 32 / 46

Article number 6DL1131-6BH00-0EH1
General information
Firmware version V1.0
• FW update possible Yes
Usable terminal block TB type H1 and M1
Color code for module-specific color identifica‐
tion plate CC01
Engineering with
• SPPA-T3000 can be configured/integrated
from version
V8.0
Operating mode
• DI
Yes
Redundancy
• Redundancy capability
Yes; With TB type M1
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption (rated value) 60 mA; without sensor supply
Current consumption, max. 120 mA; without sensor supply
Encoder supply
Output current
• up to 60 °C, max.
2 A; 1 A when mounted vertically; see derating in‐
formation in Equipment Manual
• up to 70 °C, max.
1 A; See derating information in Equipment Manual
24 V encoder supply
• 24 V
Yes
• Short-circuit protection
Yes; electronic (response threshold 0.7 A to 1.3 A;
for IO redundancy up to 2.6 A) Ensure sufficient
low-resistance cable routing to the sensor/actuator
in order to attain the response threshold. Depend‐
ing on the cable cross-section used, there may be
constraints regarding the usable length of cable
Power
Power available from the backplane bus 80 mW
Power loss
Power loss, typ. 3.6 W; Maximum value (taking the max. encoder
current and the max. operating voltage into ac‐
count)
Address area
Address space per module
Technical specifications
DI 16x24VDC HA
32
Equipment Manual, 10/2020, A5E39265608-AD