6.2. Removing the
motion detector attachment ‘Komfort’
from the insert
When the
motion detector attachment ‘Komfort’ is withdrawn
from the insert, the insert maintains its last switching state.
When plugged in again, the
motion detector attachment ‘Kom-
fort’ shows the same reaction as after a mains failure of more
than 2 seconds.
This means that the
motion detector attachment ‘Komfort’
performs a self-test lasting approximately 90 seconds. During
this time, the lighting is on. After this period, the lighting is
switched off and the preset mode of operation is active.
Attention:
Withdrawing the
motion detector attachment ‘Komfort’ from
the insert will cause the attachment to lose the stored
brightness threshold information.
68
