Fig. 15
Fig. 16
5. Settings
The OFF-delay (1), the sensitivity (2) and the brightness (3)
can be set by means of three potentiometers. These are
located at the rear of the
motion detector attachment ‘Kom-
fort’. (Fig. 15)
5.1 OFF-delay
The OFF-delay determines how long the lamps remain on
after detection of the last movement. The delay can be set
within a range of approx. 10 seconds to approx. 30 minutes.
The setting is non-linear, i.e. longer time spans can only be
selected within a relatively coarse grid.
To change the OFF-delay, turn control (1) in the desired
direction (Fig. 16).
When the
motion detector attachment ‘Komfort’ is active, each
movement detected thereafter will retrigger the OFF-delay.
This means that the OFF-delay starts all over again.
The
motion detector attachment ‘Komfort’ has no forced shutoff
function. This means that permanent movements inside the
detection field causes the lighting to be continuously on.
50
