Fig. 21
Fig. 22
6. Commissioning / operation
6.1 Recommended test settings
To test the functioning and detection performance of the
motion
detector attachment ‘Komfort’ after the installation, the device
should have the following settings (settings of the device on
delivery):
1. Select the automatic mode by setting switch (4) to center
position (Fig. 21).
2. Turn the brightness control (2) to daylight operation (end
position ‘Sun’) (Fig. 22).
3. Turn the OFF-delay control (1) to approx. 10 seconds
(Fig. 22).
4. Turn the sensitivity control (3) to maximum sensitivity
(Fig. 22).
Select the individually desired settings after testing.
66
