manualshive.com logo in svg

Siemens CLINITEK Status, Operator'S Manual, Page: 75 / 144

Share
Download
Siemens CLINITEK Status Operator'S Manual Download Page 75

5-19

5

 Instrument Set Up

System Settings

This allows selections regarding the
printer, power and sound.

System Settings

Screen 1 of 2

Printer 

– allows you to select the

preferred printing option by
touching the round button.

Automatic 

– Results for

each test will be printed
automatically when the test
is complete.

Manual 

– Test results will

not be printed automatically.
They can be printed by
touching the 

Print 

selection

area on the 

Results

screen.

Off 

– Test results will not

be printed.

Power Save

 – allows you to enable

and disable this feature. If the
instrument is powered from an
electrical outlet and is not used for
5 minutes, you may choose to have
the test table retract and the
instrument power down. When it is
powered by batteries, Power Save
is always enabled and it will power
down after 5 minutes of non-use.
Touch the 

Enabled 

(on) to activate

or

 Disabled 

(off) if the Power Save

mode is not desired.

Instrument Settings

Summary of Contents for CLINITEK Status

















































































































































Reviews:

No comments