manualshive.com logo in svg

Siemens CLINITEK Status, Operator'S Manual, Page: 4 / 144

Share
Download
Siemens CLINITEK Status Operator'S Manual Download Page 4

© 2009 Siemens Healthcare Diagnostics Inc.
All rights reserved.

Clinitek, Clinitek Status, Multistix, Multistix PRO, Combistix, Uristix,
Labstix, Neostix, Clinitest and Chek-Stix are trademarks of
Siemens Healthcare Diagnostics.

Presept and Cidex are trademarks of Johnson & Johnson.

Theracide is a trademark of Lafayette Pharmaceuticals, Inc.

Amphyl is a trademark of Linden Corporation.

Kimwipes is a trademark of Kimberly-Clark.

US Pats 5,408,535; 5,477,326; 5,877,863; 6,239,445; D456,082; D489,816

Origin: UK

The information in this manual was correct at the time of printing.
However, Siemens Healthcare Diagnostics continues to improve products
and reserves the right to change specifications, equipment, and
maintenance procedures at any time without notice.

If this instrument is used in a manner differently than specified
in this manual, the protection provided by the equipment may
be impaired.

Siemens Healthcare Diagnostics Ltd.
Sir William Siemens Sq.
Frimley, Camberley, GU16 8QD, UK

Siemens Healthcare Diagnostics Inc.
Tarrytown, NY 10591-5097 USA

Summary of Contents for CLINITEK Status

















































































































































Reviews:

No comments