manualshive.com logo in svg

Siemens CLINITEK Status, Operator'S Manual, Page: 11 / 144

Share
Download
Siemens CLINITEK Status Operator'S Manual Download Page 11

ix

Understanding the Symbols and Display Icons

VDE Testing and Certification Institute   Germany

Manufacturer’s mark (FRIWO) and manufacturing location
(Hong Kong)

Manufacturer’s mark (FRIWO) and manufacturing location
(Geratebau, Germany)

Encapsulated safety isolating transformer (short circuit proof)

Positive Temperature Coefficient (PTC)   A thermistor device
used to protect the transformer from short circuits or overload.
This is an auto reset device.

Thermal cut out (TCO)   This safety device disconnects the
supply voltage to the transformer at a specific temperature.
The operation temperature is stated below.

Ingress protection rating   protected against the entry of solid

objects >1 mm but no protection from liquids.

This symbol indicates a risk of electric shock.

Keep this way up

Fragile, handle with care

Keep dry

Keep away from sunlight and heat

Summary of Contents for CLINITEK Status

















































































































































Reviews:

No comments