manualshive.com logo in svg

Siemens CCIC1410, Configuration Manual, Page: 90 / 96

Share
Download
Siemens CCIC1410 Configuration Manual Download Page 90

Upgrade firmware 

90 

Siemens Building Technologies

 

 

Fire Safety & Security Products 

 

05.2009

 
 

11 Upgrade 

firmware 

 

This feature allows you to upgrade the firmware on your network camera. It takes 
about five minutes to complete the process. 

 

 

 

 

 

WARNING 

Do not power off the network camera during the upgrade process and ensure 
that the PC running the upgrade software (Installation Wizard / Web Browser) is 
running stable. Otherwise the camera will be rendered defective (out-of-
warranty).  

 

 

 

There are two ways to upgrade the firmware: 

z

 

Using the CCIC1410 Homepage 

z

 

Using the CCIC1410 Installation Wizard 

11.1  Using the CCIC1410 Homepage 

 

1. 

Download a new firmware file from SIEMENS website: 

http://www.siemens.com/ip-cameras

. The file is in pkg file format. 

2. 

Open the CCIC1410 Homepage (see chapter 9.1). 

3. 

Choose the 

Configuration

 menu. 

4. 

On the left hand side, choose the menu item 

Maintenance

. 

5. 

In the 

Upgrade firmware

 section, click 

Browse

 and select the correct 

firmware file. 

6. 

Click 

Upgrade

. 

Î

 

The network camera starts to upgrade and will reboot automatically when 
the upgrade is complete. 

Î

 

The message 

“Reboot system now!! This connection will close” 

indicates that the upgrade was successful. 

7. 

Re-access the network camera. 

11.2  Using the CCIC1410 Installation Wizard 

 

 

 

 

 

 

NOTE 

The CCIC1410 Installation Wizard allows you to upgrade several devices (of the same model) at the 
same time. If you select different models, then the 

Firmware Upgrade

 button will be disabled. 

 

 

 

1. 

Select one device or several devices in the device list on which you want to 
upgrade the firmware (see chapter 8.3.1: Select a device for the 
configuration). 

2. 

Click the 

Firmware Upgrade

 button on the left side.  

 

Î

 

The following window appears: 

Summary of Contents for CCIC1410

































































































Reviews:

No comments