Configuration with the CCIC1410 Homepage
59
Siemens Building Technologies
Fire Safety & Security Products
05.2009
Multicast settings for stream 1 / Multicast settings for stream 2:
Select
Always multicast
to enable multicast for stream 1 or stream 2. Unicast
video transmission delivers a stream through point-to-point transmission; multicast,
on the other hand, sends a stream to the multicast group address and allows
multiple clients to acquire the stream by requesting a copy from the Multicast group
address.
The five ports can be changed between 1025 and 65535. The multicast RTP port
must be even-numbered and the multicast RTCP port number is always the
multicast RTP port number plus one, and thus it is always odd-numbered. When
the multicast RTP port changes, the multicast RTCP port will change accordingly.
If the multicast RTP video ports are incorrectly assigned, a warning message is
displayed.
Multicast TTL [1 – 255]: The multicast TTL (Time to live) is the value that tells the
router the time range within which a packet can be forwarded.
NOTE
To utilize the RTSP streaming authentication, make sure that you have set a password for the network
camera first.
9.8
Wireless LAN settings (CCIC1410-LAW only)
1.
Open the CCIC1410 Homepage (see chapter 9.1).
2.
Choose the
Configuration
menu.
3.
On the left hand side, choose the menu item
Wireless LAN
.
4.
Define the settings, for more information see below.
5.
Click
Save
.
SSID (Service Set Identifier):
"SSID" is a name that identifies a wireless network. Access points and wireless
clients attempting to connect to a specific WLAN (Wireless Local Area Network)
must use the same SSID. The default setting is "default". Note: The maximum
length of SSID is 32 single-byte characters.
Summary of Contents for CCIC1410
Page 95: ......