Configuration with the CCIC1410 Homepage
76
Siemens Building Technologies
Fire Safety & Security Products
05.2009
z
Trigger:
Also referred to as the cause or stimulus, defines when to trigger the event. The
trigger source can be configured to use the network camera’s built-in motion
detection mechanism or external digital input devices. There are four choices of
trigger sources:
–
Video motion detection:
Select this option to allow the network camera to use the built-in motion
detection mechanism as a trigger source. To enable this function, you need to
configure motion detection first. For more information, please refer to chapter
9.12 Motion detection settings.
–
Periodically:
Select this option to allow the network camera to trigger an event periodically.
The max. value that can be set is 999 minutes.
–
Digital input:
Select one of the digital inputs to allow the network camera to use an external
digital input device as a trigger source. Depending on your applications, there
are digital input devices available on the market that sense e.g. any changes in
temperature, vibration, sound and light, etc.
–
System boot:
Select this option to allow the network camera to trigger when the power of the
network camera is disconnected.
z
Event Schedule:
The effective period in which the event stays active. Specify the effective period for
the event.
–
Select the days on a weekly basis.
–
Select the time for recording in 24-hr time.
z
Action:
Also referred to as the effect, defines the action to be performed by the network
camera when the trigger is activated. Select the action to be performed when a
trigger is activated.
–
Trigger digital output for ….. seconds:
Select this option to activate an external digital output device when an event is
triggered. Specify the duration of the trigger interval in the text box.
–
Server name / Media name:
Select the server and media name to allow the network camera to send the
media files to the server when a trigger is activated.
When completed, mark the checkbox
Enable this event
. Click
Save
for your
settings to take effect and then click
Close
to exit this page. The new event name
will appear in the event drop-down list on the application page. To remove an event
setting from the list, select an event name from the drop-down list and then click
Delete
.
Summary of Contents for CCIC1410
Page 95: ......