manualshive.com logo in svg

Siemens ARCADIS Avantic, Start-Up Instructions, Page: 8 / 66

Share
Download
Siemens ARCADIS Avantic Start-Up Instructions Download Page 8

8

General Information

ARCADIS Avantic

SPR2-330.815.01.03.02

Siemens AG

12.06

CS PS SP

Page 8 of 66

Medical Solutions

Safety information

1.2

General safety information (in existing documents)

0

WARNING

Danger of injuries, death or material damage.

Non-compliance can lead to death, injury or material damage.

Please note: 

¹

The product-specific safety information in these instruc-
tions,

¹

The general safety information in TD00-000.860.01... and

¹

The safety information in accordance with ARTD Part 2.

General electrical safety information

0

WARNING

Electrical safety!

Non-compliance can lead to severe injury or even death, as well
as material damage.

¹

Parts under electrical voltage are accessible when the 
covers are open. To avoid danger, disconnect the system 
from the power supply before opening the covers. Dis-
connect the power plug.

¹

If an uninterruptible power supply (UPS) is installed in 
the system, the voltage output of the UPS must also be 
deenergized or the voltage output plug must be discon-
nected.

¹

If work steps must be performed using electrical power, 
the general safety information according to 
TD00-000.860.01... must be observed.

Summary of Contents for ARCADIS Avantic



































































Reviews:

No comments