manualshive.com logo in svg

Siemens ARCADIS Avantic, Start-Up Instructions, Page: 22 / 66

Share
Download
Siemens ARCADIS Avantic Start-Up Instructions Download Page 22

22

General Information

ARCADIS Avantic

SPR2-330.815.01.03.02

Siemens AG

12.06

CS PS SP

Page 22 of 66

Medical Solutions

Note on the power connection

1.6

The system delivery state is provided by the power connection values on the the line volt-
age label (back of the monitor cart).

Necessary adjustments to local conditions are to be performed as required according to 
the adjustment instructions of the ARCADIS Avantic system.

The system leakage current measurement guidelines must be observed.

WARNING

Electrical voltage!

Non-compliance can lead to severe bodily injury and even death.

¹

The internal uninterruptible power supply of the system 
(UPS) provides several components with line voltage - 
even when the system is switched off or the system 
power plug is disconnected.

¹

Before the system is programmed to the local line volt-
age/line frequency, it must be disconnected from the 
power supply (the power plug must be disconnected) 
and the voltage output plug of the UPS must be discon-
nected as well.

Summary of Contents for ARCADIS Avantic



































































Reviews:

No comments