Siemens Advanced Server UNIX V4.0 Overviews & Installation Instructions Download Page 57

Page: 57 / 365

Installing Advanced Server for UNIX

Installing the prerequisited packages

Product Manual

U7613-J-Z815-6-76

iem

dor

fad

: D:

613

761

Example entries in

names.cfg:

Note that both the server name (“mypdc”) and the domain name (“mypdc.dom”)

must be given together with the server's IP address.

or (as an alternative):

Edit the file

/var/opt/nbrfc/conf/interfaces.cfg

and configure the IP address of the primary

controller’s subnet in the appropriate interface section using the parameter
“brdcast_list=”:

Example entry in

interfaces.cfg

If the

brdcast_list

line is commented out (default), do not forget to uncomment the

line!

To ensure that the primary domain controller can be found if this server is a WINS
client:

Edit the file

/var/opt/nbrfc/conf/wins.cfg

and add the appropriate WINS server addresses.

For detailed information on configuring name resolution, refer to section

“Configuring

NetBIOS Name Resolution”

In any case, you should now reboot the system before proceeding with the instal-

lation of the server software.

# My primary domain controller
mypdc

144.145.101.10 UN

# The domain I want to join
mypdc.dom 144.145.101.10 UN #1b

[et0]

active=yes

used_by_wins=yes

ip_addr=default

brdcast_addr=default

# Subnet address of my primary domain controller:

brdcast_list=144.145.101.255

netmask=default

Summary of Contents for Advanced Server UNIX V4.0














































































































































































































































































































































































Search results

Summary of Contents for Advanced Server UNIX V4.0

Reviews:

Related manuals for Advanced Server UNIX V4.0

Brands by name

Popular brands

Siemens Advanced Server UNIX V4.0, Overviews & Installation Instructions

Search results

Summary of Contents for Advanced Server UNIX V4.0

Reviews:

Related manuals for Advanced Server UNIX V4.0

Brands by name

Popular brands