manualshive.com logo in svg

Siemens Advance Network Gateway, User Manual, Page: 34 / 72

Share
Download
Siemens Advance Network Gateway User Manual Download Page 34

26  

••

  Data Communications Setup

2000590-001

Configuring Your PC

The Advance Network Gateway (ANG_EN) has a built-in utility for con-
figuring the ANG_EN. The Windows

 HyperTerminal program, which

resides on most PCs, can be used to access the utility. Other serial
communication packages that support the following settings can also be
used.

Baud rate:

57.6k baud

Data bits:

8

Parity:

none

Stop bits:

1

Flow control:

none

The following procedure uses the Windows 

HyperTerminal 

program, to

connect to the ANG_EN.

1.  Click the Start button, and then click on 

Programs.

2.  Click the 

HyperTerminal 

icon to start the Program.

The 

Connection Description 

dialog box will open

3.  In the

 Name

 field type in a Connection Name. Example: Advance

Network Gateway.

4.  In the 

Icon

 field select an Icon to represent the name selected.

Description

Instructions

Summary of Contents for Advance Network Gateway









































































Reviews:

No comments